Services · SCTE-35

Mark the ad break on the live channel.

Queue an SCTE-35 cue on the HLS output. Use the cue on its own, or pair it with a local ad from your video library. The SRT listener can carry the same mark the next time it starts.

What the cue does

A mark in the HLS

The cue tells a player or an ad system that a break has started. It is written into the HLS output of that channel. Break lengths are 10, 15, 30, 60 or 120 seconds.

Cue only

The mark goes out with the programme. The picture stays on the channel content. Use this when a downstream platform inserts its own ads.

Cue plus a local ad

Pick a video from the library for that break. If the ad file fails, the programme keeps running. The channel does not go black because an ad missed.

A start time

You can store a future time. The scheduler sends the cue when that time arrives. This is a clock on the cue, not an EPG feed.

SRT listener

HLS gets the cue tags. The SRT listener can carry the cue on PID 500 the next time that listener starts.

One channel at a time

Open SCTE-35, choose the channel, turn the cue on, set the mode and the break, then queue it. Each channel keeps its own setting.

How a break is sent

  1. Pick the channel — the cue belongs to one live channel.
  2. Turn SCTE-35 on — choose cue only, or cue plus a local ad.
  3. Set the break — 10, 15, 30, 60 or 120 seconds.
  4. Queue it — send it now, or store a start time for the scheduler.
  5. Read the HLS — the cue tags are on the HLS output. A queued cue is not the same as confirmed playback in a player.

What it does not do

RTMP outputs, including YouTube and Facebook restreams, do not carry SCTE-35. Campaigns, player VAST and counted impressions live in Ad Manager. A stored cue is not an impression, and one shared output plays the same ad for every viewer.